Schleuniger ACO 08, Руководство по эксплуатации

Страница: 11 / 52

Safety
Operating Manual
| Edition 1.00 (08-2020) | ACO 08 11 | 52
Any hazards that cannot be eliminated by design measures or protective devices are considered to
be residual hazards. The safety information in this operating manual indicate known residual
hazards. If other dangers become apparent during operation, then the operating company must
inform
Schleuniger
of these immediately.
Under some circumstances, the following residual hazards can occur:
■
Injuries and faults on the product can occur due to inadequate maintenance of the product.
■
Danger of tripping, falling and slipping caused by connection cables, compressed air hoses and
wire residues on the floor.
■
Injuries may happen when working at the workplace without adequate lighting.
2.4 PROPER AND INTENDED USE
Notice
Use the product only as intended!
Each use of the product which contradicts the intended use is considered as
improper. Schleuniger accepts no liability for damages as a result of improper use.
Caution
Intended use
The product has been designed and built exclusively for the intended use specified
below:
The ACO 08 is used for monitoring and analyzing the crimping process within the
range according to the technical data.
Nonadherence can lead to injury to the operating personnel and material damage.
Caution
Reasonably expected misuse
Do not use the product for the following tasks:
■
Monitoring/analyzing force values on machines not intended for this task
Non-adherence can lead to injury to the operating personnel and material damage.
2.5 SAFETY SYMBOLS USED
2.5.1 Safety symbols used in the manual
Safety symbols are used in this manual to warn the operator of possible dangers. These are
described in detail below.
General
danger!
Hints and instructions marked with this symbol must be strictly
followed. Disregard can lead to injuries and material damage.
Electrical
current!
There is a danger of electric shock at the power connector and
inside the machine. This means that you must always switch off
the machine at the main switch and disconnect it from the
mains power supply before opening. Users may injure
themselves if they come in contact with live components.