Schleuniger ACO 08, Руководство по эксплуатации

Страница: 29 / 52

General handling / operation
Operating Manual
| Edition 1.00 (08-2020) | ACO 08 29 | 52
Signal inverse Mode of the PLC/stop signal Normal/inverse
Filter Noise filter on/off
Calibration factor Calibration factor for comparison of calibration
values
0.01 - 100
Trigger category
Option Description Value
Trigger mode Mode of the start encoder:
■
External: External start encoder
■
Internal 1: Start encoder through
generated sensor force on channel 1
■
Internal 2: Start encoder through
generated sensor force on channel 2
Ext/Int1/Int2
Trigger level Force value for internal start encoder (if active) 1-99 %
Trigger offset Time shift of the starting time to the start
encoder
-2000-2000
measuring
points
Crimp category
Option Description Value
Reference amount Number of crimps to form the reference
curve
1 - 100
Sample Factor Enlarging the measuring window for longer
crimping processes by skipping n-1
measurements
1-20
Aktive channels Determines which channels are activated. Ch1/ch2/ch1+
2
Shift curve peak Shifts the crimping curves to the X axis (time)
and superimposes them at the maximum
value to compensate for irregular times.
on/off
Always acknowledge
error
On: Requires acknowledgment in case of
error
Off: No acknowledgment, machine
continues running
Secure: Acknowledgment by password entry
on/off/secure
Auto reference check Evaluates the deviation of curves automatically
in reference mode. Each reference must be
confirmed manually if disabled.
on/off