background image

7

/

33

1.6. Commitment of the Staff

Only people who give reason to expect that they will reliably do their job are allowed. Persons whose ability to react is 
affected, for example by drugs, alcohol or medication, are NOT allowed.

Every person that is involved in the mounting of FS Uno must have read and understood these Mounting Instructions, 
especially chapter "1.4 Safety Precautions", as well as all relevant chapters regarding the corresponding operations.

These Mounting Instructions should always be kept available and easily accessible for all persons involved.

• 

Only trained and instructed qualified personnel are allowed to execute the operations mentioned in this instruction manual.

Staff that still is to be trained may only mount the FS Uno system under the supervision of an experienced person.

1.7. Training of the Staff

These Mounting Instructions are addressed to personnel qualified in the areas of transportation and loading, mounting, 
disassembly and disposal, having the following qualifications:

The professional staff members must be capable of fulfilling the tasks they have been assigned with and must be able to 
realize and avoid dangers on the basis of their professional formation, experience, expertise and their specific know-
ledge of the relevant regulations.

The qualified staff members must have the required knowledge of the guidelines regarding safety, accident prevention 
and environmental protection, as well as of loading and unloading regulations that apply at the respective construction site.

• 

The qualified personnel have the driving licenses required at the specific construction site to be able to drive site vehicles
and operate construction machines.

We recommend the operator to insist on a confirmation in writing in each case.

1.5. Obligation of the Plant Owner / Operating Company

The plant owner ensures that all parts of these Mounting Instructions are stored readily available and handy at the plant.

The plant owner/operating company undertakes to only let people work at and in the striking distance of the plant who

have read and understood the parts of the mounting instruction that are relevant for the respective operations,

are familiar with the fundamental regulations on work safety, accident prevention and protection of the environment

and have been instructed in the safe handling of the plant (training course).

Before starting any mounting works, the plant owner/operating company designates

a supervising person and ensures that

the construction site is inspected using plans showing all supply lines (water, electricity, gas) and thus

the position of all underground supply lines and unstable ground without sufficient load-bearing capacities are marked 
properly or sealed off with barriers.

Schletter Solar GmbH – Alustraße 1 – 83527 Kirchdorf 

Mounting instruction 

FS UNO

 with SRF Foundation Posts

 | 2016.09 V.00

4

 

Содержание FS Uno

































Отзывы: