Schleifenbauer V2.62, Руководство пользователя

Страница: 36 / 58

Note: Firmware 2.62 or newer required.
maximum
temperature [
​
o
​
C]
The value of the upper limit represents the maximum temperature allowed in Celsius. An alert
occurs if the temperature of any connected temperature sensor exceeds the set value.
It can be disabled by setting it to ‘0’.
sensor change
alert Informs sensor related changes in the PDU such as a new sensor, a disconnected sensor or a
broken sensor.
extended name
support
This feature allows the use of longer names for inputs, outlets and sensors when viewing the web
interface or using SNMP when enabled. This setting also affects the names shown on the display.
●
limited to 18 characters
●
setting is valid for SNMP, the web interface and the LCD display
●
for API and Modbus, both the original and extended name registers can be
simultaneously and independently used.
●
when the device is configured in bridge mode, all connected devices should support the
extended name feature to work properly.
​ When using both Classic and ethernet PDUs in a databus, the extended name suport may lead to
conflicting situations.
Locate
Locate a PDU by flashing it’s display.
Blink display This function lets the display of the PDU blink in a heartbeat pattern. Users can easily locate a
specific PDU that’s placed in a room with multiple PDUs using this function.
Stop blinking Stops blinking of the PDU display. Blinking can also be stopped by pressing one of the buttons on
the PDU.
Page 36 of 58 V262_User manual
Schleifenbauer PDU