How to view PDU connection information?
How can I check in which mode and with what protocol the PDU is running?
You will find all information related to the PDUs network connection in the IPv4
Link and IPv6 Link pages.
IPv4Link:
●
Lnk
= current Ethernet link status of the device
●
St
= IP status:
■
DHCP: Acquiring/Bound, Static, Static fallback
■
‘-‘ when there is no link
●
IP
= IP address of the device
●
NM
= subnet mask of the device
●
GW
= IP address of the Gateway or Router
●
MAC
= MAC address of the device
The IPv6 link will show up to 3 IPv6 addresses. The first one will be your link-local
address which will always start with FE80:: the second and third will be your LAN
and WAN address respectively.
In the “IP Interfaces” display you can find information about the device mode in
which the PDU is working:
●
Mode
= hybrid, databus , bridge, colocation, …
The display shows the status, and which protocol & port number is used for:
●
HTTP
●
API
●
Modbus
●
SNMP
●
IPMode (IPv4, IPv6 or both)
See the chapter “
Schleifenbauer databus: what is it
?” in this manual
for explanations of the term hybrid, bridge, ….
When there is active communication with the PDU, the interface
colors will be inverted. Text is white and the background is blue.
When the interface is used, the text becomes blue and the
background white.
Page 19 of 58
V262_User manual
Schleifenbauer PDU
Содержание V2.62
Страница 1: ...V2 62 Schleifenbauer PDU User manual...
