Schiller BOB-CAT 912480A Скачать руководство пользователя страница 7

Страница: 7 / 80

QUICKCAT

SAFETY

OPERATING SAFELY

Operating engine parts, especially the muffler, be

come extremely hot. Sever burn can result from con-

tact. Debris such as grass clippings, leaves, brush,

etc. can catch fire

– Allow engine parts, especially the muffler, to cool

before touching.

– Remove accumulated debris from engine and

muffler area.

WARNING

Engine exhaust contains carbon monoxide, which is

an odorless gas that can kill you.

DO NOT run the engine indoors or in a confined

small area (such as an enclosed trailer) where

carbon monoxide fumes can collect.

Starting

– Start only according to instructions in this manual

or on the machine.

– Lightning can cause severe injury or death. If

lightning is seen or thunder is heard in the area,

DO NOT operate the machine; seek shelter.

– Be sure all drives are in neutral and parking

brake is engaged before starting engine.

– Do not change engine governor settings or

overspeed the engine. Operating the engine

at excessive speed can increase the hazard of

personal injury.

Operation

– Do not put hands or feet near rotating parts or

under the machine. Keep clear of the discharge

opening at all times.

– This mower was designed for use by one

operator. Keep all others away during operation.

– Do not operate when people, especially children,

or pets are in the area.

– Stop the machine if anyone enters the area.
– Do not mow in reverse unless absolutely

necessary. Always look down and behind before

and while backing.

– Slow down and use caution when making turns

and crossing roads and sidewalks.

– Stop blades when not moving.
– Stop blades when crossing surfaces other than

grass.

– Do not mow with the discharge deflector raised,

removed or altered unless there is a grass

collection system or mulch kit in place and

working properly.

– Do not start the cutting blades until you are ready

to start mowing.

– Use care when approaching blind corners,

shrubs, threes, or other objects that may obscure

vision.

– Do not direct discharge towards others.
– Avoid discharing material against a wall or

obstruction. Material may ricochet back toward

the operator.

– Obey safety instructions. Failure to do so may

cause injury to yourself and/or others.

– Never leave a running machine unattended.

Park on level ground, turn off blades, stop engine

and remove key before leaving the operator

position.

Stopping

– Park the machine on level ground. Stop the

engine, remove the key and wait for all parts to

stop moving before:

- Checking cleaning or working on the mower.

- After striking a foreign object or an abnormal

vibration occurs. Inspect and make any

necessary repairs before restarting and

operating the mower.

- Before clearing blockages or unclogging.

– Park the machine on level ground. Stop the

engine, remove the key and wait for all parts to

stop moving.

- Whenever you leave the mower.

- Before refueling.

- Before emptying the grass catcher.

– Be sure all drives are in neutral and parking

brake is engaged before starting engine.

– Do not change engine governor settings or

overspeed the engine. Operating the engine

at excessive speed can increase the hazard of

personal injury.

WARNING

Содержание BOB-CAT 912480A

















































































Результаты поиска

Содержание BOB-CAT 912480A

Отзывы:

Похожие инструкции для BOB-CAT 912480A

Бренды по названию

Популярные бренды

Schiller BOB-CAT 912480A, Руководство оператора и список запчастей

Результаты поиска

Содержание BOB-CAT 912480A

Отзывы:

Похожие инструкции для BOB-CAT 912480A

Бренды по названию

Популярные бренды