manualshive.com logo in svg

Schiller BOB-CAT 912480A, Руководство оператора и список запчастей


Поделиться
Скачать
background image

1

QUICKCAT

IMPORTANT MESSAGE

Thank you for purchasing this Schiller Grounds Care, Inc. product.  You have purchased a world class mowing product, one of the best 
designed and built anywhere.  

This machine comes with an Operation and Safety Manual and a separate Setup, Parts and Maintenance Manual. The useful life and good 
service you receive from this machine depends to a large extent on how well you read and understand these manuals. Treat your machine 
properly, lubricate and adjust it as instructed, and it will give you many years of reliable service.

Your safe use of this Schiller Grounds Care, Inc. product is one of our prime design objectives.  Many safety features are built in, but we 
also rely on your good sense and care to achieve accident-free operation.  For best protection, study the manuals thoroughly. Learn the 
proper operation of all controls. Observe all safety precautions. Follow all instructions and warnings completely.  Do not remove or defeat 
any safety features.  Make sure those who operate this machine are as well informed and careful in its use as you are. 

See a Schiller Grounds Care, Inc. dealer for any service or parts needed.  Schiller Grounds Care, Inc. service ensures that you continue to 
receive  the best results possible from Schiller Grounds Care, Inc. products.  You can trust Schiller Grounds Care, Inc. replacement parts 
because they are manufactured with the same high precision and quality as the original parts.  

Schiller Grounds Care, Inc. designs and builds its equipment to serve many years in a safe and productive manner.  For longest life, use this 
machine only as directed in the manuals, keep it in good repair and follow safety warnings and instructions.  You’ll always be glad you did. 

Schiller Grounds Care, Inc.

One Bob Cat Lane

Johnson Creek, WI   53038-0469

09-2019

TABLE OF CONTENTS ..................................................................... FIGURES .......................................................... PAGE

SAFETY .............................................................................................................................................................................2-8

ASSEMBLY AND SETUP ..................................................................................................................................................... 9

LABELS .........................................................................................................................................................................10-12

CONTROLS ...................................................................................................................................................................13-16

OPERATION ..................................................................................................................................................................17-20

MAINTENANCE CHART  ................................................................................................................................................... 21

MAINTENANCE RECORD ................................................................................................................................................. 22

MAINTENANCE  ...........................................................................................................................................................23-30

ADJUSTMENTS ............................................................................................................................................................31-34

BELT REPLACEMENT  ...................................................................................................................................................... 35

SPECIFICATIONS .........................................................................................................................................................36-38

PARTS SECTION ............................................................................................................................................................... 39

ENGINE DECK ASSEMBLY ............................................................FIGURE 1 ..........................................................   40, 41

RIDER PLATFORM ASSEMBLY .....................................................FIGURE 2 ............................................................ 42, 43

WHEEL & TRANSAXLE ASSEMBLY ..............................................FIGURE 3 ............................................................ 44, 45

FUEL TANK & BATTERY ASSEMBLY .............................................FIGURE 4 ............................................................ 46, 47

PARKING BRAKE ASSEMBLY........................................................FIGURE 5 ............................................................ 48, 49

UPPER WIRE HARNESS ...............................................................FIGURE 6 ............................................................ 50, 51 

NON EFI 48" & 52" LOWER WIRE HARNESS ...............................FIGURE 7 ............................................................ 52, 53

NON EFI 61" LOWER WIRE HARNESS .........................................FIGURE 8 ............................................................ 54, 55

EFI 52" & 61" LOWER WIRE HARNESS ........................................FIGURE 9 ............................................................ 56, 57

TOWER ASSEMBLY .......................................................................FIGURE 10 .......................................................... 58, 59

RIDER PAD & FENDER ASSEMBLY ..............................................FIGURE 11 .......................................................... 60, 61

CONTROLS ASSEMBLY .................................................................FIGURE 12 .......................................................... 62, 63

DECK LIFT ASSEMBLY ..................................................................FIGURE 13 .......................................................... 64, 65

CASTER & BELT COVER ASSEMBLY ...........................................FIGURE 14 .......................................................... 66, 67

48" SIDE DECK ASSEMBLY ...........................................................FIGURE 15 .......................................................... 68, 69

52" SIDE DECK ASSEMBLY ...........................................................FIGURE 16 .......................................................... 70, 71

61" SIDE DECK ASSEMBLYASSEMBLY ........................................FOGIRE 17 .......................................................... 72, 73

48"/52" CHUTE, BAFFLES & EDGES .............................................FIGURE 18 .......................................................... 74, 75

61" CHUTE, BAFFLES & EDGES ...................................................FIGURE 19 .......................................................... 76, 77

Содержание BOB-CAT 912480A

















































































Отзывы:

Нет отзывов

Похожие инструкции для BOB-CAT 912480A

Baroness LM315GC Assembly And Installation Manual preview
LM315GC
Бренд: Baroness Страницы: 19
Baroness LM315GC Technical Leaflet preview
LM315GC
Бренд: Baroness Страницы: 4
Baroness LM2700 Technical Information preview
LM2700
Бренд: Baroness Страницы: 5
Baroness LM180 Technical Information preview
LM180
Бренд: Baroness Страницы: 3
Baroness SP05 Service Manual preview
SP05
Бренд: Baroness Страницы: 142
Baroness GM1700 Service Manual preview
GM1700
Бренд: Baroness Страницы: 192
Baroness LM18G Series Service Manual preview
LM18G Series
Бренд: Baroness Страницы: 60
Ransomes JMP653 Safety, Operation & Maintenance preview
JMP653
Бренд: Ransomes Страницы: 114
Yard force LM G37A Instruction Manual preview
LM G37A
Бренд: Yard force Страницы: 30
Major CYCLONE MJ31-200 Operator'S Manual And Parts List preview
CYCLONE MJ31-200
Бренд: Major Страницы: 88
Yardworks 060-1787-8 Instruction Manual preview
060-1787-8
Бренд: Yardworks Страницы: 36
Yardworks 060-1778-0 Owner'S Manual preview
060-1778-0
Бренд: Yardworks Страницы: 27
AL-KO 426 036 Manual preview
426 036
Бренд: AL-KO Страницы: 25
Toro Z Master 75990 Operator'S Manual preview
Z Master 75990
Бренд: Toro Страницы: 72
Bushranger 53AH6IMSP Operator'S Manual preview
53AH6IMSP
Бренд: Bushranger Страницы: 20
Dolmar AM-3638 Instruction Manual preview
AM-3638
Бренд: Dolmar Страницы: 88
Toro Recycler 20009 Operator'S Manual preview
Recycler 20009
Бренд: Toro Страницы: 12
Toro Recycler 20017 Operator'S Manual preview
Recycler 20017
Бренд: Toro Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды