Schiller BOB-CAT 912480A Скачать руководство пользователя страница 21

Страница: 21 / 80

QUICKCAT

Turns during reverse movement:

–

Reverse right turn

move the right traction

lever forward toward

neutral to slow the right

drive wheel.

–

Reverse left turn

move the left traction

lever forward toward

neutral to slow the left

drive wheel.

Slow, sweeping turns are made with both traction

levers on the same side of neutral and slightly

apart. True zero radius turns about the center of the

machine are made by having one lever in reverse

while the other is in forward. By varying the relative

positions of the two levers, the rate of turn is varied to

suit the mowing situation.

Slow down before making sharp turns. The machine

is capable of turning very rapidly when the levers are

moved further apart from each other. Loss of control

and/or turf damage may result.

STOPPING

1. Turn PTO switch to OFF.
2. Release control traction levers or move to neutral.
3. Put machine in PARK.
4. Turn key to OFF (counterclockwise).

STEERING

Forward movement

- To

move the machine straight

ahead, push both control

levers forward equally

from their neutral posi-

tion.

Increase speed:

as the levers are moved

farther forward from the neutral position. There are

two maximum forward speeds. There is a "CUT"

speed and a "TRANSPORT" speed. Cut speed is

limited to a maximum recommended speed to obtain

a good quality cut. Transport speed is limited to

the maximum speed of the machine.

Decrease

speed:

when traveling forward, pulling the traction

levers rearward slows the machine.

Stopping:

The

machine will stop when the levers reach the neutral

position.

Reverse movement

- To

move the machine straight

back, pull both traction

levers back equally from

their neutral position. Reverse speed increases as

the levers are moved back farther. Maximum reverse

speed is reached when the levers stop. When mov-

ing in reverse, pushing the levers forward slows the

machine, and the machine stops when the neutral

position is reached.

NOTE

: The control levers are spring loaded to return

to neutral in both forward and reverse. This spring

resistance may be felt when moving the traction

levers. When control levers are released, spring

tension will return them to the neutral position.

To turn, move

one lever forward and one back.

Turns during forward movement:

–

Forward

Right turn

- move the right trac-

tion lever back toward

neutral to slow the right

drive wheel.

–

Forward Left turn

- move the left traction

lever back toward neu-

tral to slow the left drive

wheel.

OPERATION

FORWARD

REVERSE

FORWARD RIGHT TURN

FORWARD LEFT TURN

REVERSE RIGHT TURN

REVERSE LEFT TURN

ZERO TURN RADIUS

Содержание BOB-CAT 912480A

















































































Результаты поиска

Содержание BOB-CAT 912480A

Отзывы:

Похожие инструкции для BOB-CAT 912480A

Бренды по названию

Популярные бренды

Schiller BOB-CAT 912480A, Руководство оператора и список запчастей

Результаты поиска

Содержание BOB-CAT 912480A

Отзывы:

Похожие инструкции для BOB-CAT 912480A

Бренды по названию

Популярные бренды