Scheppach TIGER2000S, Руководство по сборке и эксплуатации

Страница: 5 / 17

3. Maintain a safe environment. Keep the area well lit. Make sure there is
adequate surrounding space. Always keep the area free of obstructions, grease,
oil, trash, and other debris. Do not use an electrically powered product in areas
near flammable chemicals, dusts, and vapors.
PAGE 5
4. Never leave the Wet Grinder unattended when it is plugged into an electrical
outlet. Turn off the Grinder and unplug the tool before leaving.
5. Carefully inspect the condition of the Wet Grinder before use, and check
the tool continually during use. If any damage is noted, stop immediately
and repair or replace the Grinder.
6. Avoid electrical shock. Make sure the Wet Grinder is unplugged from
its electrical outlet prior to performing any inspection, maintenance, or
cleaning procedures. Do not use the Grinder/Buffer in the rain or in wet
conditions.
7. Use the right product for the job. There are certain applications for which this
product was designed. Do not use small tools, equipment, or accessories to do
the work of larger industrial tools, equipment, or accessories. Do not use this
product for a purpose for which it was not intended.
8. Do not allow children or other unauthorized people to handle or play with
this product.
9. Industrial applications must follow
WHSA
requirements.
10. Frequently immerse the workpiece in water to prevent overheating.
11. Use the Tool Attachments to steady the workpiece. If the Tool Attachments
are not used, the torque of the spinning Grinding/Polishing Wheel may pull the
workpiece from your hands.
12. Do not use aluminum oxide wheels when grinding nonferrous metals such
as aluminum and brass. Use silicon carbide wheels (not included) for
nonferrous metals.
13. Never install a Grinding Wheel on the polishing side of the tool. Never use
any accessory not specifically designed for this machine. Never attempt to install
a wire brush, abrasive flap wheel, or sanding disc on this Wet Grinder.
14. Performance of this tool (if powered by line voltage) may vary depending on
variations in local line voltage. Extension cord usage may also affect tool
performance.
15. WARNING! Some dust created by power sanding, sawing, grinding, drilling,