Scheppach 5909220900, Перевод оригинального руководства пользователя

Страница: 20 / 68


www.scheppach.com

service@scheppach.com

+(49)-08223-4002-99

+(49)-08223-4002-58
20 GB
Sanding and surfaces:
The sanding output and the quality of the surface fin -
ish are determined by the grade of grit on the sanding
sheet.
Always use sanding sheets with grades that are suit -
able for the particular surface you are sanding.
9. Cleaning
Danger!
Always pull out the battery pack before starting any
cleaning work.
Cleaning
• Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
• We recommend that you clean the device immedi -
ately each time you have finished using it.
• Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts of
the equipment. Ensure that no water can seep into
the device. The ingress of water into an electric tool
increases the risk of an electric shock.
10. Storage
Store the device and its accessories in a dark, dry
and frost-proof place that is inaccessible to children.
The optimum storage temperature is between 5 and
30˚C. Store the electrical tool in its original packag -
ing. Cover the electrical tool in order to protect it from
dust and moisture. Store the operating manual with
the electrical tool.
11. Maintenance
There are no parts inside the equipment which re -
quire additional maintenance.
Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol -
lowing parts are therefore also required for use as
consumables.
Wear parts*: Sanding sheets
* Not necessarily included in the scope of delivery!
Switching on the device:
Slide rechargeable battery (not included in the deliv -
ery) onto the device.
The ON switch (1) is located on the left side of the
device. To switch on the device, press the ON switch
(1).
Switching off the device:
The OFF switch (5) is located on the right side of
the device. To switch off the device, press the OFF
switch (5).
Vacuum dust extraction
Warning! Danger of fire! There is the danger of fire
when working with electrical devices that have a dust
box or can be connected to a vacuum cleaner. Under
certain conditions the wood dust in the dust extrac -
tion bag (or in the vacuum‘s dust bag) may ignite, e.g.
as a result of flying sparks generated when abrading
metals or metal objects left in wood.
This can happen particularly if the wood dust is
mixed with paint residue or other chemicals and the
abraded particles are hot from prolonged abrasion.
Therefore you must empty the device’s dust collec -
tion box and the vacuum cleaner’s dust bag before
taking a break or stopping work and always avoid
overheating of the abraded particles and the device.
Wear a dust mask!
Warning ! Remove the rechargeable battery before
carrying out work on the device.
Dust bag (Fig. 1)
Connection:
Slide the tube on the dust bag (2) onto the suction
port (6).
Removal:
Draw the dust bag (2) off the suction port (6).
Alternatively, it is also possible to fasten a suction
hose onto the suction port instead of the dust bag.
Note: To guarantee optimum suction, empty and
knock out the dust bag (2) in a timely manner.
Attaching / detaching sanding sheets (Fig. 2)
Warning! Remove the rechargeable battery before
carrying out work on the device.
Attaching:
Sanding sheets are attached to the backing plate (3)
by means of the hook and pile fastening.
Detaching:
Simply pull the sanding sheet off the backing plate (3)
(see Fig. 2).