Scheppach 5909220900, Перевод оригинального руководства пользователя

Страница: 19 / 68


www.scheppach.com

service@scheppach.com

+(49)-08223-4002-99

+(49)-08223-4002-58

www.scheppach.com

service@scheppach.com

+(49)-08223-4002-99

+(49)-08223-4002-58
19 GB
Noise and vibration
m
Warning: Noise at the workplace can exceed 85
dB (A). In this case, noise protection measures are
necessary for the user (wear hearing protection!).
Noise output in dB
sound power level L
W A
87 dB(A) (EN ISO 3744)
sound pressure level L
pA
76 dB(A) (EN ISO 11201)
uncertainty K
wa/pA
3 dB(A)
Vibration value
Vibration a
h
9,5 m/s²
Uncertainty K
h
1,5 m/s²
7. Unpacking
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for trans -
port damage. Inform the transport agent imme -
diately of any faults. Later complaints cannot be
considered.
• If possible, store the packaging until the warranty
period has expired.
• Familiarize yourself with the machine with the help
of the operating instructions manual before using
it.
• Use only original parts for accessories as well as
consumables and spare parts. Spare parts can be
obtained from your retailer.
• Please quote our article numbers as well as type
and production year in all your orders.
m
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas -
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
8. Installation
m
IMPORTANT!
You must fully assemble the appliance before
using it for the first time!
To ensure that the Li battery pack provides long ser -
vice you should take care to recharge it promptly.
You must recharge the battery pack when you notice
that the power of the cordless equipment drops.
Caution ! Make sure that the device is switched off
before you connect it to the mains supply.
Note ! Always switch on the delta sander before
bringing it into contact with the workpiece material.
• The battery can be damaged by pointed ob -
jects such as nails or screwdrivers or by force
applied externally. An internal short circuit may
occur, causing the battery to burn, smoke, explode
or overheat.
• Only use the battery with products from the
manufacturer. This is the only way in which you
can protect the battery against dangerous over -
load.
• Protect the battery against heat, e.g. against
continuous intense sunlight, fire, water, and
moisture. There is a risk of explosion.
Information on the rechargeable battery
Please observe the operating manual for the re-
chargeable batteries.
Information on the charging unit and charging
process
Please observe the operating manual for the charg-
ing unit.
Warning! This electric tool generates an electro-
magnetic field during operation. This field can im -
pair active or passive medical implants under certain
conditions. In order to prevent the risk of serious
or deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool
Residual risks
The machine has been built according to the state of
the art and the recognised technical safety require -
ments. However, individual residual risks can arise
during operation.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re -
main.
• Residual risks can be minimised if the „safety in -
structions“ and the „Proper use“ are observed
along with the whole of the operating instructions.
• Avoid accidental starting of the machine.
• Use the tool that is recommended in this manual..
This ensures that your machine performs optimally.
• Hands may never enter the processing zone when
the machine is in operation.
6. Technical data
Motor power supply: 20 V
Rated speed: 10000 min
-1
Size of paper. : Ø 125 mm
Weight 1,1 kg
Subject to technical changes!