www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
28 | GB
16.
Remove adjusting keys and wrenches
- Form the habit of checking to see that keys and
adjusting wrenches are removed from the tool
before turning it on.
17.
Avoid unintentional starting
- Ensure switch is in “off” position when plugging in.
18.
Use outdoor extension leads
- When the tool is used outdoors, use only ex-
tension cords intended for outdoor use and so
marked.
- Use the cable drum only in the unrolled state.
19.
Stay alert
-
m
Watch what you are doing, use common
sense and do not operate the tool when you are
tired.
20.
Check damaged parts
- Before further use of tool, it should be carefully
checked to determine that it will operate properly
and perform its intended function.
- Check whether the moving parts are working
properly and are not becoming jammed or
whether parts are damaged. All parts must be
correctly itted and satisfy all conditions to en-
sure the proper operation of the power tool.
- The movable guard must not be clamped when
it is open.
- A guard or other part that is damaged should be
properly repaired or replaced by an authorized
service centre unless otherwise indicated in this
instruction manual.
- Have defective switches replaced by an author-
ized service centre.
- Do not use any faulty or damaged connection
cables.
- Do not use the tool if the switch does not turn it
on and off.
21.
WARNING
!
- The use of any accessory or attachment other
than one recommended in this instruction manu-
al may present a risk of personal injury.
22.
Have your tool repaired by a qualiied person
- This electric tool complies with the relevant
safety rules. Repairs should only be carried out
by qualiied persons using original spare parts,
otherwise this may result in considerable danger
to the user.
Additional safety instructions
1.
Safety Precautions
•
m
Warning!
Do not use damaged, cracked or de-
formed saw blades.
• Replace a worn table insert.
• Only use saw blades recommended by the manu-
facturer which conform to EN 847-1.
•
m
Warning!
When changing the saw blade ensure
that the cutting width is not smaller and the main
blade thickness of the saw blade not greater than
the thickness of the riving knife!
6.
Do not force the tool
- It will do the job better and safer at the rate for
which it was intended.
7.
Use the right tool
- Do not force small tools to do the job of a heavy tool.
- Do not use the power tool for such purposes
for which it is not intended. Use for example no
circular saws to cut tree branches or logs.
- Do not use the electric tool to the irewood saws.
8.
Dress properly
- Do not wear loose clothing or jewellery, they can
be caught in moving parts.
- Non-skid footwear is recommended when work-
ing outdoors.
- Wear protective hair covering to contain long hair.
9.
Use protective equipment
- Use safety glasses.
- Use face or dust mask if working operations
create dust.
10.
Connect dust extraction equipment
- If the tool is provided for the connection of dust
extraction and collecting equipment, ensure
these are connected and properly used.
- Indoor operation is permitted only with a suitable
extraction system.
11.
Do not abuse the cord.
- Never yank the cord do disconnect it from the
socket. Keep the cord away from heat, oil and
sham edges.
12.
Secure work
- For long workpieces, an additional supporting
surface (table, trestles, etc.) is required in order
to prevent tipping of the machine.
- Always press the workpiece irmly against the
working surface and stop in order to prevent
wobbling or twisting of the workpiece.
13.
Do not overreach
- Keep proper footing and balance at all times.
- Avoid awkward hand positions in which one or
both hands could touch the saw blade as the
result of a sudden slip.
14.
Maintain tools with care
- Keep cutting tools sharp and clean for better
and safer performance.
- Follow instruction for lubricating and changing
accessories.
- Inspect tool cords periodically and if damaged have
them repaired by an authorized service facility.
- Inspect extension cords periodically and replace
if damaged.
- Keep handles dry, clean and free from oil and
grease.
15.
Disconnect tools
- Never remove loose splinters, chips or jammed
pieces of wood when the saw blade is running.
- When the electric tool is not in use, before main-
tenance and when changing tools such as the
saw blade, drill bit, milling cutter.
Содержание 5901313904
Страница 7: ...www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 7 39 38 31 30 37 28b 28a...
Страница 53: ...www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 53...
Страница 56: ...www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 56...
Страница 59: ...www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 59...
