www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
29
GB
Cut off the cable ties on the tension springs. Open the protective cover (1) and mount the tension springs as displayed in
the image.
14. Handling the protection cage
• Open the protective cover (1).
• Insert the material to be cut.
• Close the protective cover (1).
• Swivel the rocking frame (2) with hand grip (A) or (B) to the saw blade and saw through the material to be cut.
• Swivel the rocking frame (2) back and open the protective cover.
• Add more material to be cut and close the protective cover again.
15. Sawing operation
1
After the machine has been switched on, wait until the saw blade has reached full speed.
2
Put the wood on the rocker.
3
Take hold of both handle bars of the rocker with both hands and lead it evenly to the saw blade; thus the saw blade
is revealed.
4
Push the rocker evenly to ensure the engine speed does not drop.
5
Remove the wood from the rocker after it has returned to the initial position and the saw blade is covered. Then
place the next workpiece.
m
Attention!
• Do not leave the machine unattended during operation.
• Switch the machine off and remove the mains plug or take out the ignition key when stopping work.
1
A
B
2
2
1
