Scheppach 1903301801, Перевод с оригинального руководства пользователя

Страница: 14 / 58

14 english
Warning symbols
Wear proper work shoes and gloves!
Wear safety goggles!
Read manual!
Trouble shooting
Problem Possible Cause Solution
Motor does not start up. – no electricity
– capacitor and/or switch defective
– extension cord defective – check fuses
– allow an expert to check capacitor
and switch
– unplug the machine, check and
replace, if necessary, the extension
cord if necessary
Sanding belt slides through – sanding belt stretched after long
use
– pinch pin is not correctly installed
– too much pressure downwards
– put on a new sanding belt
– turn the pinch pin exactly
– move the work piece while it is
being sanded
Sanding belt does not run evenly – sanding belt is defective or torn
– sanding belt is stretched after long
use
– check, replace
– replace the sanding belt with a new
one
Sanding belt runs in the wrong
direction – wrong direction in the rotary motor – let an electrician check the polarity
of the wall socket
Warning: remove mains fuse!