USAGE AND INSTALLATION INSTRUCTIONS SAM 3x3
Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS
9
Mounting backboard padding
:
Step 1:
Fit the padding with the corresponding bolts,
M6 nuts, spring washers and washers, the
padding is equipped with 4 bolts / nuts on the
bottom and 1 bolt / nut on both sides.
Remove transport bracket:
Step 1
:
Remove the transport bracket, this can now
be done safely. Save the transport bracket,
it is needed for any future transport or if
the board needs to be replaced.
Assemble side padding: 1x left and 1x right
Step 1:
On each side padding, mount the 4 plates
with lip on the back with button heads
M8x25, a washer and spring washer M8.
Step 2:
Using the aluminium strips and the 4x20
screws, mount the padding inserts into the
designated openings of the side padding.
Step 3:
Place the padding against the side of the
base frame and lower the lips into the
appropriate slots in the base frame.
Mounting lower front padding
Step 1:
Hang the hinge parts in the base frame
Step 2:
Mount the lower front padding through the
hole in the base frame using the button
heads with washer and spring washer.
Fold out the front padding and mount
the remaining 2 button heads.
