USAGE AND INSTALLATION INSTRUCTIONS SAM 3x3
Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS
3
Safety
1.
General Information
Although the utmost care has been taken
with this manual, errors and omissions may
not be completely excluded. Schelde Sports
therefore accepts no liability whatsoever, not
even for direct or indirect damage, caused by
or in connection with the use and application
of this installation manual. In every situation,
safety regulations must be observed, both
general rules and the instructions in this
manual.
2.
How to use this manual
This manual contains instructions for
assembly. Please read this manual and
instructions related to the assembly of this
product carefully and ensure that the manual
is always within easy reach. To avoid the risk
of (serious) injury, read and apply all
warnings, precautions and instructions in this
manual.
The supervisor must inform users of the
presence of this user manual and the
obligation to read it before using this
product.
3.
Warning
•
The backboard, the ring with the net
and the paddings may only be mounted
by qualified personnel.
•
Always observe local and general
building regulations and safety
regulations.
•
All parts may only be used for
basketball purposes, the guarantee will
be void if used for another purpose.
•
Always work with a minimum of two
people.
•
Always mount the backboard together
with the ring.
•
Never remove the transport bracket
before the backboard is mounted,
removing the transport bracket without
the backboard can cause serious
accidents. The springs are under
considerable tension
•
Store the transport bracket and the
associated fasteners.
•
The backboard is made of tempered
glass, be extremely careful!
4.
Introduction
Rollable foldable basketball stand, type SAM
3x3, with patented DSF system. Hard glass
backboard, 105 x 180 cm (10 years warranty)
thickness 12 mm, mounted in steel frame.
Includes super padding. With dunk ring +
super net. This basketball stand is equipped
with a special balance spring system for light
and simple adjustment of the ring at various
heights.
The stand is executed with the required counterweights
and possibly with floor fixings at the rear of the base
frame. Height in storage position 210 cm. Approved and
recommended by FIBA.
The stand is delivered in parts; a padding set,
backboard, ring and net, and braces, board
padding, feet of the stamps (DSF or APF) and
the mounted stand with a set of mounting
material. The cover plate and cover for the
springs and the weights have already been
mounted. Any banner set and 24-second clock
are available optionally.
