USAGE AND INSTALLATION INSTRUCTIONS SAM 3x3
Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS
8
Mounting braces vertical adjustment
basketball backboard:
Step 1:
Mount the M12 adjusting yoke on plate in the
two upper corners of the board with 2x
M10x30 lock bolt with washer and spring
washer. Place the plate in the middle of the
slotted holes and tighten the nuts.
Note: do not tighten the adjusting yoke
completely, as it must still be able to be
turned when the strut is fitted.
Step
2:
Mount the struts (2x) by means of the
supplied bolts M10x30, washers and self-
locking nuts.
Levelling the board:
Step 3:
Horizontal: The board should be horizontal
with respect to the base frame. Thus the
level on the board must have the same
position as on e.g. the bottom bar of the
base frame. Placing the board vertically and
perpendicular to the mast is done by
turning in and out the two board struts. If
the board is vertical and perpendicular,
then tighten the lock nuts M12 of the struts.
Step 4:
Note: mount the board perpendicular to the
tree. After setting horizontally, tighten all
the bolts and nuts of the ring and plate
against the head.
Step 5:
Mount the protective cap of the ring.
