USAGE AND MOUNTING INSTRUCTIONS
SAM 3x3
Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS
14
If necessary,
adjustment of the
spring set
If the stand has been in use for some time,
the spring tension can decrease to such an
extent that the setting up of the stand is
seriously hampered. The tension of the
springs should then be increased. To adjust
the tension, do the following steps:
Step 1:
Fold the stand in playing position.
Step 2:
Remove the two cover plates above the
springs and the cover above the weights.
Step 3:
The springs are tensioned by a rod to which
the springs are attached; unscrew the lock
nuts 1 and turn the nuts 2 so that the rod
moves at least 1 cm towards the fastening
points 3.
Step 4:
Tighten the lock nuts 1 again. Hold nut 1
when tightening nut 2.
Step 5:
Check the stand by bringing it into storage
position and back in playing mode again; if
the setting up is too heavy, repeat steps 1 to
4 until the stand can be set up with little
effort. Then attach the cover plates.
