USAGE AND INSTALLATION INSTRUCTIONS SAM 3x3
Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS
7
Assembly
Mounting rollable basketball stand:
Warning
•
The backboard, the ring with the net and
the paddings may only be mounted by
qualified personnel.
•
Always observe local and general building
regulations and safety regulations.
•
Always work with a minimum of two
people.
•
Always mount the backboard together
with the ring.
•
Accessory mounting glass backboard.
Mounting basketball stand/basketball hoop:
Step 1
Mount the attachment 1 on the tube of the
board
Step 2
Hang the board (with at least 2 people) on
the mast of the stand. Mount the board with
2 bolts M10x25 2 and washers against the
head plate of the mast.
Step 3
Insert the 2 bolts M10x100 3 through the
board and the head plate of the mast, do
not mount the self-locking nuts yet!
Step 4
Remove the protective cap 5 from the ring.
Hang the ring over the bolts M10x100 and fit
the lock nuts. Also mount the 2 bolts M10x25
4 in the bottom holes of the ring.
Do not remove transport bracket before
the basketball backboard has been
mounted!!!
Removing the transport bracket without
having mounted the board can cause serious
accidents. The springs are under considerable
tension.
-
Save the transport bracket and the
associated fasteners.
-
The backboard is made of tempered
glass, be extremely careful.
