background image

6

general operating instructions

Disposal of old equipment

At the end of its service life the device has to be disposed of in accordance with national regulations. It is recommended 

to contact a company specializing in waste disposal or contacting the disposal department of your commune.

WARNING:
To prevent misuse and associated hazards, render your old appliance unusable before disposing of it. To 

do this, disconnect the appliance from the mains supply and remove the mains connection cable from 

the appliance. To dispose of the appliance, follow the regulations in force in your country and municipa-

lity.

The MH-heating systems are approved for the use of  „diesel“ and  „heating oil“. Any other type of fuel for 

operating have to be in advance approved by the manufacturer SCHEER. The heaters are designed for 230 Volts.

The connection in the vehicle has to be fed from the battery of the vehicle via an inverter approved in road traffic within the 

scope of the ECE Regulation. Alternatively, the heater can also be done via a 230V direct supply (for example: direct supply of 

the campsite).

WARNUNG: Danger from electric current!
The appliance may only be operated at properly installed individual sockets with protective contact.
Do not pull the mains connection cable out of the socket by the cable, always grasp the housing of the mains plug.

control box A for MH-Series

STL* release 

button (STB*)

STL indicator

Domestic hot water heating

(optional)

Radiators (optional)

Underfloor heating (optional)

Tank-Control

(if the tank is empty - lights up red) 

(optional)

Tank-Control

* Safety temperature limiter

Burner demand

Item No.

control box A

0754481

Содержание MH 10 Micro



















Отзывы: