10
Before installing the thermostat
1. Read this instruction manual carefully. If you do not follow these instructions, you may damage the product
or cause dangerous situations.
2. Make sure that the thermostat is suitable for the intended use.
3. The installer must be trained in the connection of electrical products (especially 230V) and have sufficient
experience in connecting electrical equipment.
4. After installation, check for correct operation according to these instructions.
CAUTION:
Risk of electric shock or damage to tools and
product during connection. There is a possibility
of persons experiencing an electric shock or a
short circuit causing damage to equipment or
the product.
Before installation, make sure that the power
supply and all other connection lines are de-
energised!
Technical Data
Power Supply
95~240VAC, 50~60Hz
Timing error
<1%
Current Load max
5A
Shell Material
PC + ABS (fire proof)
Sensor
NTC3950, 10k
Installation Box
86x86mm square/ Europ.
60mm round
Accuracy
±0,5°C
Wire Terminals
2*1,5mm² / 1x2,5mm²
Set Temp. Range:
5-35°C
Protection Class
IP20
Display Temp. Range
5~99°C
Storage Temp
-5~45°C
Ambient Temp.:
0~45°C
Power Consumption
<1,5W
Ambient Humidity:
5~95% RH (not condensing)
