48
B. Filling of the water softener container
The water softener container is beneath the lower dish rack.
Only use a water softener (= dishwasher salt) which is
suitable for
dishwashers
. Other water softeners and salts, especially table salt, will damage
the water softener container.
The manufacturer shall not guarantee against and is not liable for any damage
caused by an unsuitable water softener.
Fill the container only shortly before you start a programme, otherwise spilled
residuals of the water softener may remain in the appliance and cause corrosion.
The control light on the control panel goes off after the first programme.
1.
Remove the lower dish-rack and the lid of the water softener container.
2.
Put the equipped funnel in the opening and pour approx. 1.5 kg water softener
(=dishwasher salt) in the container.
3.
Then fill the container with water. It is normal that a small amount of water will
run out of the container.
4.
Close the lid carefully.
5.
The control light for the water softener goes off when having filled the
container.
6.
Start a programme when having filled the container; otherwise the filter, pump
or other main components of the appliance can be damaged. Failure to do so
will expire the guarantee.
NOTICE!
1. You must refill the container when the water softener indicator goes
on. The indicator may not go out unless the water softener has
dissolved completely.
2. If you have spilled some water softener when filling the container, you
can run the rapid programme to eliminate residues.
3. If you have to transport the appliance, use an absorbent cloth to
