42
5.
Connect the appliance to the mains properly.
6.
The nameplate is inside the appliance or at the back.
Installation
Levelling
You can adjust the height of the appliance using the
adjustable feet. The inclination of the appliance must never
be more than 2
0
.
Connection of the safety supply hose
Use brand-new hoses and connection kids only.
The supply hose is a double wall hose. The safety system will block the flow of
water if the hose breaks or the air-filled interspace of the two walls is filled with
water.
The water pressure must be between 0,04 MPa and 1 MPA. Contact the
aftersales service if the water pressure is less than the minimum value.
1.
Pull the supply hose completely out of its storage
compartment at the back of the appliance.
2.
Connect he supply hose to the tap using the 3/4 inch
thread.
3.
Open the water fully before starting the appliance.
WARNING!
A hose, which is connected to a sink spray, can burst if it
is installed on the same water line as the dishwasher. If your sink has
one, it is recommended to disconnect the hose and plug the hole.
Cold water connection
Connect the supply hose to a connector with a 3/4 inch thread firmly and securely.
When the hoses are new or were not used for an extended period of time, let the
water flow until the hose is clear of any contamination.
NOTICE!
Otherwise the water inlet may be blocked and the appliance
will be damaged
WARNING!
Close the tap after use.
