47
2021-02-10 / V1.0
Contactors C195 Series – Installation and Maintenance Instructions
Maintenance
0.8-1 Nm
1
2
3
7
Fig. 55: C195 S/, C195 T/: Disassembling/assembling the con-
tact unit (the figure shows C195 S/, the procedure is
identical for C195 T/)
0.8-1 Nm
1
2
3
7
Fig. 56: C195 W/: Disassembling/assembling the contact unit
Assembly
ATTENTION
Incorrect installation of the contact unit due to two
possible installation positions leads to malfunctions
and destruction of the contactor.
X
Before installing the contact unit on the mag-
netic drive, observe the previously noted cor-
rect orientation in relation to the base plate.
X
Carefully place the contact unit (2) on the mag-
netic drive (3).
-
Make sure that the cover (7) does not lift off the
housing of the contact unit (2).
X
Screw the contact unit (2) onto the magnetic drive
(3) using the two screws (1) and tighten it with a
torque of 0,8-1 Nm.
