24
2021-02-10 / V1.0
Installation
Contactors C195 Series – Installation and Maintenance Instructions
Auxiliary switches at latching contactor
variants
The latching contactor variants (type C195 A/ ...BD and
C195 S/ ...BD) have a hard-wired auxiliary switch (3),
which is required to switch over the board for the bi-
stable drive. This auxiliary switch (3) is already connect-
ed on delivery.
A further S870 auxiliary switch (2) is available for cus-
tomer use and must be connected if applicable.
X
Plug the pre-assembled control wires with the
receptacles (1) to the terminals of the auxiliary
switch (2).
X
If applicable bundle and secure the wires using
cable ties.
1
2
6.3 x 0.8 mm
3
Fig. 21: C195 A/ ...BD latching contactor: Connecting the S870
auxiliary switch
1
2
6.3 x 0.8 mm
3
Fig. 22: C195 S/ ...BD, latching contactor: Connecting the S870
auxiliary switch
