Fire damper BSK-RPR-EU
Technical
documentation
Accessories
Construction subject to change
No return possible
Version: 2015-02-01 | Document: 09/48 | Page 10
ACCESSORIES
Available at an extra charge
Stainless steel model with material no. 1.4301 (V2A) or
material no. 1.4571 (V4A - All replaceable, non-coated
parts are made of stainless steel material no. 1.4301
(V2A))
Model with additional DD coating (solvent-containing
two-component top coat based on polyurethane var-
nish - RAL 7035 / light-grey) inside / outside
Model with additional powder coating (RAL 9010 / pu-
re white), inside and outside
Limit switch type ES, limit switch Easy-Eco-Tx (EasyBus)
Electric spring return actuators B10 or B11
Smoke detection system type RMS with abZ no. Z-78.6-
58. Usability depends on damper dimension. For a
technical description and documentation, see technical
documentation Smoke detection system RMS.
Signalling and switching bus system type EasyBus
Fire damper mini-controller BKSYS
Extension piece type VT-RF
1.)
Assembly part type REBT
2.)
required for installation of
the smoke detection system type RMS
Finishing protective grating, type ASG-RF/-RS
1.)
1.)
Standard model galvanised sheet steel, model material no.
1.4301 or 1.4571, powder coating (RAL 9010 / pure white)
and DD coating (RAL 7035 / light grey) possible.
2.)
Standard design galvanised sheet steel, model material no.
1.4301 or 1.4571 possible.
LIMIT SWITCH
Limit switch type ES
Electric limit switch for "OPEN" and/or "CLOSED" position in-
dicators. Switching element including one NC and one NO
contact each, 4 connections for M3.5 screw terminals for
maximum 2 mm². 250 V AC, I
e
6A, IP67 -using suitable cable
glands M20 (on site).
Figure 13: Circuit diagram limit switch type ES
Damper positions that can be displayed:
Type ES 1 Z: "CLOSED"
Type ES 1 A: "OPEN"
Type ES 2: "OPEN" and "CLOSED"
Limit switch type Easy-Eco-Tx
For a technical description and documentation, see technical
documentation Signalling and switching bus system type
EasyBus.
