Schaerer Siena-2, Руководство пользователя

Страница: 51 / 198

BASL - 02 - V01 Page 49
User manual
UK
6.3 Programming the machine: general set-
tings
Display Entry
Press the programming
button
.
Press the programming level
button
.
Select the desired programming
language with + / -. Continue
with the programming button
.
Select the desired brewing tem-
perature with + / -. Continue with
the programming button
.
Select the period till standby
mode with + / -. Continue with
the programming button
.
Select the warning tone or the
muting switching with
+ / -. Continue with the pro-
gramming button
.
The telephone number for any
service support appears. Con-
tinue with the programming but-
ton
.
The programming is ended.
6.4 Programming the machine: protected
settings
By means of a personal code these settings can be made
inaccessible to third parties. On delivery, no code has been
programmed.
Display Entry
Press the programming
button
.
Press the programming level
button
.
Access code: Select each digit
using + / - and confirm with
.
Reset to 0 with
. Continue
with the programming button
.
Lock individual product buttons
with + / -. Continue with the pro-
gramming button
.
Display Entry
Enable access for executing the
decalcifying programme with + /
-. Continue with
.
Enable access for product pro-
gramming (product buttons) with
+ / -. Continue with
.
Enable access to system pro-
gramming (general settings)
with + / -. Continue with
.
Switch the meter display for pro-
duct buttons on/off with + / -
(Counting continues in the back-
ground). Continue with
.
You can set the decalcification
requirement depending on water
hardness with +/-. Continue with
.
OFF = Switched off
0° - 5° dH
6° - 10° dH
11° - 15° dH
16° - 20° dH
>20° dH
Only coin slot option. Amend
price for each product button
with + / -. Confirm each button
with
.
Option coin slot only: Switch
the free drawing on or off with + /
- . Continue with .
Change the access code: set
each digit with + / - and confirm
with + / -
. Continue with .
If necessary, you can reset the
coffee machine to the factory
settings. All previously set val-
ues are reset (Counter ex-
cluded).
Press + button:
The following message is
displayed:
"Execute?"
button = Cancel
+ button
= Select factory set-
ting
The programming is ended.
Ready
Product, 2x C
English
Temp. 86 ° C
Buzzer EIN
++41318585111
Ready
Ready
Product, 2x C
Code ####
Counter status
Descaling ON
Prog.prod. ON
Prog. sys. ON
Counter ON
Change price
free product ON
Change code
Ready
Standby 1h
Descaling OFF
Factory settings
Keylock
Buzzer ON