Operating and maintenance instructions
Transport and storage
Version 1.0
Page 14 of 56
3 Transport and storage
Warranty
If any damage is discovered after delivery, report it immediately to the transport
company, the insurance company and Schabmüller GmbH.
Failure to report the discovered damage will void the warranty.
The motors are tested and delivered ready for installation. The machined surfaces are
protected against rust with a corrosion inhibitor. Immediately after receipt, the
packaging and the motor must be inspected for external transport damage.
3.1 Transport
Observe the following safety instructions for each transport:
CAUTION
Danger of injury from falling objects.
Only lift packaging or our products at the lifting points provided for this purpose
Take into account the weight indicated on the packaging or on our products
and the lifting capacity of the lifting device
Do not tip the packaging
Put down the packaging or our products gently (without impact) to avoid
storage damage
Replace the corrosion protection or protective devices that were removed for
the incoming inspection immediately after the inspection
Do not remove any protective devices until shortly before installation
3.2 Incoming inspection
Proceed in the order given:
Step
Procedure
1
Check all parts (also parts in additional packaging).
2
Unpack the motor and inspect it thoroughly for damage.
3
Reprocess any damage to the paint coat or rust protection on machined
surfaces.
NOTICE
