Operating and maintenance instructions
Safety
Version 1.0
Page 12 of 56
2 Safety
2.1 General safety instructions
2.1.1 Obligations of the operating company
Only qualified persons who carry out work on the motors and consistently observe and
implement the supplied operating and maintenance instructions as well as the
standards and safety instructions mentioned may install, commission and service the
motors.
Before any work is carried out on the motors, it is the responsibility of the supervisor to
draw the attention of his qualified personnel to the dangers that could occur during this
work. Improper use of the motors or improper maintenance by unqualified personnel
can lead to serious damage to health and material damage.
2.1.2 Qualified personnel
Qualified personnel are persons who, on the basis of their training, experience and
instruction as well as their knowledge of relevant standards, accident prevention
regulations and corresponding operating conditions, are authorised to carry out the
necessary activities.
2.2 Safety instructions in these operating instructions
The motor corresponds to the state of the art and the recognised safety regulations.
Nevertheless, dangers can arise during operation and during maintenance and repair
work.
These dangers are pointed out in these operating instructions with safety instructions.
The safety instructions precede the relevant descriptions or work steps.
2.2.1 Structure of the safety instructions
The safety instructions consist of the following elements:
1. Danger signs
2. Signal word
3. Nature and source of the danger
4. Possible consequences of non-observance
5. Measures for the avoidance/avoidance of danger
Danger
sign
SIGNAL WORD
Nature and source of the danger
Possible consequences of non-observance
Measure for the avoidance/avoidance of danger
