SCANMASKIN SCAN COMBIFLEX 450NS, Руководство пользователя

Страница: 28 / 39

Scan Combiflex 450 – Manual
Chapter 3
- 54 -
3.5 Inside vehicles
§
Detach the tools according to the instruction in “ 4.14 Changing tools ”.
§
Secure the machine inside the vehicle.
Secure the machine according to local transport safety regulations before transporting the
machine inside a vehicle. Failure to secure the machine may result in injuries or damages .
Scan Combiflex 450 – Manual
Chapter 4
- 55 -
4 Operation
4.1 Precautions
Any machine, if it is not used according the regulations, may be hazardous for operating,
setting-up and service personnel. The operating authority is responsible for compliance with
the safety regulations during operation and maintenance, and for the use of safety devices
supplied with the machine, as well as the provision of appropriate additional safety devices!
Never operate the machine without proper tools.
Eye and ear protection must be worn at all times.
Never operate the machine when it’s not in its upright position.
Make sure there is no debris in the work area.
Check the work area for screws or other hard objects in the concrete. Don’t use the machine
if there are any foreign objects stuck into the surface. Before operate the machine such
objects must be removed.
Read “2
Safety Regulations
” before operating the machine.
4.2 Machine functions
The gear barrel has got three grinding heads that rotates in the opposite direction of the gear barrel.
Each grinding head is equipped with a Scan-on plate where each plate hold the tools used. See
“ Figure 4-1 ”.
Figure 4-1 Illustrates the rotation of the grinding heads versus the gear barrel.
The machine is equipped with a thermal protection circuit that will shut down the machine in
the event of high motor temperature. Wait at least 15 minutes before operating the machine
again if this occurs.
54 55
ENGLISH
www.scanmaskin.com www.scanmaskin.com
SCAN COMBIFLEX 450/450NS