SCANMASKIN SCAN COMBIFLEX 450NS, Руководство пользователя

Страница: 22 / 39

Scan Combiflex 450 – Manual
Chapter 1
- 42 -
Figure 1-1 Standard SC-450
Figur 1-2
SC-450 NS
1.3 Tools
The machine must be equipped with tools approved by Scanmaskin Sweden AB before
operation.
See “ Grinding guide ” for information about available tools and “4.14 Changing tools” for
information about how to change the tools.
The tools are fitted using the Scan-On system for easy fitting.
Available tools
• Diamond tools
• SC-Tiger PCD
• Sand paper
Figure 1-2 Scan-On plate with tools fitted.
Scan Combiflex 450 – Manual
Chapter 1
- 43 -
1.4 Range of application
SC 450 is exclusively designed to process horizontal surfaces. SC 450 must not be used for
other purposes than stated in this user guide. The manufacturer will not be liable for damage
or injury resulting from incorrect usage of SC 450. Failure to follow the directions in this
user guide will void the warranty.
Typical applications
• Removal of old coatings, carpets, putty from hard surfaces
• Removal of undulated concrete surfaces
• Preparation of the surface for coatings
• Polishing of the surface
• Removal of coating defects
• Removal of glue residues
SC 450 is recommended from small to medium sized work sites.
1.5 Scope of supply
The following parts are included with the standard SC 450 grinding machine:
• User Guide
• 5 mm hexagon socket key
Machines sold outside of Europe will be either equipped with a local standard connector for the
power inlet or the mating connector will be included and fitted at the main power inlet.
Read “2.6 Electrical safety” before connecting any included connectors .
42 43
ENGLISH
www.scanmaskin.com www.scanmaskin.com
SCAN COMBIFLEX 450/450NS