#SC 45TW-SS 10 – 110202
Page 24 of 40
5. Insert the stator, turn the machine upside
down and place the bearings, gear and
bolts, as shown on the picture, into the
main housing. Tighten the bolts (pos. 15)
diagonally, use Loctite 243.
6. Place the turbine shaft and gearbox
in housing. Tighten the bolts (pos.25)
diagonally, use Loctite 243.
7. Mount the nozzle housing, the gear, bearing and cover on the main housing.
Tighten the bolts (pos. 10) diagonally, use Loctite 243.
8. Mount the nozzles and lock them with the stop screws. Use the Loctite 577
on all the threads on the nozzles and nozzle tubes, and Loctite 243 on the
stopscrews.
9. Insert the turbine cone and turbine. It is important to get the right speed
on the turbine, check “6.3. Speed Adjustment” on page 15. Lock the turbine
position with the contra nut.
10. Place the connection upon the housing and fasten the locking plates and
bolts. Use Loctite 243. Bend up the corners of the locking plate to lock the
bolts.
11. Testrun the machine to check that everything is working as it should.
15
8
13
Designer
Date
Date
Drawer
Surface treatment
Weight
Note
Dimension
Material
General Tolerances
Tolerance ISO 2768-m Gen. surface
N9
This document is our property and shall not without our permission in writing be altered, copied, used for manu- facturing or communicated to any person or company.
Drawing no. / Ritningsnr.
Format
SC45TW Nytt utf Ø9-12 mm
A4
Scale
SC45TW-S-XX
1:2
SC45TW New Ø9-12 mm
Denna handling är vår egendom och får ej utan vårt skriftliga medgivande ändras, kopieras, användas för tillverkning eller delges annan person eller firma.
SS-ISO 2768-m for machined parts
(30)-120=
0.3
0.5-3=
0.1 (120)-315=
0.5
(3)-30=
0.2 315)-1000=
0.8
P01
Törnedalsgatan 1, 275 21 Sjöbo
SWEDEN
JC
Revision
05-03-24
E
No.
Revision note
Date
Sign.
Qty.
Ins.
gram
