#SC 45TW-SS 10 – 110202
Page 23 of 40
7.5. Reassembly
Gearbox
20
Loctite 638
Designer
Date
Date
Drawer
Surface treatment
Weight
Note
Dimension
Material
General Tolerances
Tolerance ISO 2768-m Gen. surface
N9
This document is our property and shall not without our permission in writing be altered, copied, used for manu- facturing or communicated to any person or company.
Drawing no. / Ritningsnr.
Format
Växellåda SC45TW SMST
A4
Scale
40151-0
1:2
Gearbox SC45TW ASM
Denna handling är vår egendom och får ej utan vårt skriftliga medgivande ändras, kopieras, användas för tillverkning eller delges annan person eller firma.
SS-ISO 2768-m for machined parts
(30)-120=
0.3
0.5-3=
0.1 (120)-315=
0.5
(3)-30=
0.2 315)-1000=
0.8
P01
Törnedalsgatan 1, 275 21 Sjöbo
SWEDEN
JC
Revision
05-12-09
E
No.
Revision note
Date
Sign.
Qty.
Ins.
gram
1. Start by putting together the gearbox,
if the bearings have been changed
carefully press them into places. Use
Loctite 638 on bearing (pos. 20).
2. Be careful not to damage the gear teeth while mounting the gear and gear
shafts. First assemble the vertical gear and gear shaft. Turn the gear and
gear shaft to make the holes concentric. This enable the stopscrew to lock it
properly. Use Loctite 243 on stopscrew.
3. Assemble the horizontal gearshaft, place the gear upon it and lock with the
retaining ring (pos. 32)
4. Tighten the sleeve assembly (pos. 22) but make sure the gear rotates freely.
Lock the stopscrew (pos. 21), use Loctite 243.
32
27
28
29
30
33
22
24
21
30
30
20
18
27
36
34
35
Loctite 243
Loctite 243
Designer
Date
Date
Drawer
Surface treatment
Weight
Note
Dimension
Material
General Tolerances
Tolerance ISO 2768-m Gen. surface
N9
Drawing no. / Ritningsnr.
Format
Växellåda SC45TW SMST
A4
Scale
40151-0
1:2
Gearbox SC45TW ASM
P01
Törnedalsgatan 1, 275 21 Sjöbo
SWEDEN
JC
Revision
05-12-09
E
No.
Revision note
Date
Sign.
Qty.
Ins.
gram
