#Bio25 11 – 140813
Page 22 of 40
4. When you have mounted the gears and gear shafts, lock the stopscrews in
the gear shafts.
5. Put the bearing ring (pos. 15) into the housing along with the ball race (pos
3) and nozzle gear (pos. 12) as shown below. These will be loose inside the
machine. Mounting the nozzle housing will lock the bearings and gear in
their positions.
6. Use the tool “25256” to keep the nozzle gear and the bearings in place while
mounting the nozzle housing. You can either hold the tool in vertical position
or fasten the tool in a screw vice and place the housing, with bearings inside,
upon the tool. See the picture below. Make sure that all four locking shafts
have gone in completely.
