4.
Remove the upper hinge axis,
transfer it to the other side and
tighten securely, then put it in a
safe place.
5.
Remove the door from the lower
hinge NOTE: When removing the
door, watch for washer(s) between
the lower hinge and the bottom of
the lower door that may stick to the
door. Do not lose.
6.
Place it on a smooth surface with its
panel upwards. Loosen the screws.
7.
Lay the refrigerator on soft foam
packaging or similar material. Re-
move both adjustable feet, and the
lower hinge part by unscrewing the
special
flange
self-tapping
screws.
8.
Replace the lower hinge part to the left
side and fix it with the special flange self-
tapping screws. Move and fix the adjust-
able feet to the other side.
9.
Place the door to the proper position,
adjust the lower hinge part, place the
hinge axis into the lower hole of the
door.
10.
Transfer the upper hinge part and place
the upper hinge axis into the upper hole
of the door. Adjust the position of the
door (please support the door with your
hand when doing it), fixing the upper
hinge part with the special flange self-
tapping screws.
11.
Install the screw hole cover on the top
right corner of the refrigerator. Install
the upper hinge cover (which is in the
plastic bag) on the left corner. Put the
other upper hinge cover into the plastic
bag.
