Operation
14
SC 1500 - Doc. No. 018522-000/03-025
GB
Setting UV detection sensitivity (UV-version only)
Note!
If mis-detection often occurs (a real note is taken for a counterfeit),
select a lower sensitivity. If no-detection (the counterfeit is taken for
real note) occurs, select a higher sensitivity.
1)
Press
SET
.
2)
Press
UV
several times to select the proper sensitivity level:
– “L”: low sensitivity;
– “M”: medium sensitivity;
– “H”: high sensitivity.
3)
Press
ST/CL
.
Setting counting speed (SP)
Note!
If the
SP
-key is not available, see
“Setting counting speed (SET)” on
page 15
.
Press
SP
to select the desired counting speed.
The display will show:
• “L”: low speed
• “M”: medium speed
• “H”: high speed.
To change the fixed values of the three counting speeds:
1)
Press
SET
. “SP1” appears on the batch display.
2)
Press numerical key
1
(increase) or
0
(decrease) to select the
desired high speed.
3)
Press
SET
. “SP2” appears on the batch display.
4)
Press numerical key
1
or
0
to select the desired medium speed.
5)
Press
SET
. “SP3” appears on the batch display.
6)
Press numerical key
1
or
0
to select the desired low speed.
7)
Press
ST/CL
.
