9
Introduction
SC 1500 - Doc. No. 018522-000/03-025
GB
Three-dimensional detection
(3D-versions only)
Detects notes/documents of differing width
and
length
(long side) in any bundle. The function can be switched
off, can be set to check the short side only (
DD
-function)
or to check both short side and long side at the same time
(
3D
-function). A symbol will indicate the currenct choise
on the display:
3D
-function
not
in use.
DD
-function in use.
3D
-function in use.
The accuracy for long side and short side detection can be
set separately. The factory setting is 4 mm (short side) and
5 mm (long side). The setting will remain even if the
machine is switched off.
Magnetic print detection
(MG-versions only)
Checks for magnetic ink print. Can be used for example
on US$ and Euro-notes. The purpose is to detect
suspicious notes/documents.
When a suspicious note/document is detected, the
machine stops at once with a beep tone and “CF2”
appears on the display.
Magnetic metal thread detection
(MT-versions only)
Checks for magnetic metal thread. Can be used to verify
the security thread in for example Euro-notes and/or
notes/documents with a similar type of metal thread. The
purpose is to detect suspicious notes/documents.
When a suspicious note/document is detected, the
machine stops at once with a beep tone and “CF4”
appears on the display.
Note!
Cannot be used on all notes. The factory setting is for
Euro-notes.
Description
MG
MT