Operation
12
SC 1500 - Doc. No. 018522-000/03-025
GB
Batch counting
The machine will count the notes/documents according to the
selected batch number and then stop.
The batch size “100” is automatically selected when the machine is
switched
On
. Press
C
to clear the batch number.
1)
Set any batch number by means of the numerical keys
0-9
.
2)
Place the notes on the feed table. The counting starts
automatically and stops when the selected batch size has been
reached.
3)
Remove the counted notes. The counting continues
automatically as long as there are notes on the feed table.
Adding (AD)
1)
Press
C
to clear the batch number and disable the batch
counting mode.
2)
Press
AD
. “AD” appears on the display.
3)
Place the notes on the feed table. The counting starts
automatically. Each batch of notes will be counted and added to
the total. The count display will show the total number of notes
counted.
Setting dimension detection accuracy (DD-function,
short side)
1)
Press
DD
or
Press
SET
several times until “dd”
appears on the display.
2)
Press numerical key
1
(increase) or
0
(decrease) to select the
desired detecting accuracy. The range is 2-7 mm.
3)
Press
ST/CL
.
or