Introduction
6
SC 1500 - Doc. No. 018522-000/03-025
GB
Positional references
Unless stated otherwise, positions and directions such as left, right,
upper, lower, front, rear, clockwise and counter-clockwise are given
with respect to the machine when viewed from the front.
Installation
WARNING!
Risk of electric shock!
The machine is of metal construction and must therefore always be
earthed to the supply. Ensure that both the plug on the supply lead and
the supply source are earthed. This is a requirement for this type of
equipment and if not adhered to will contravene the national and
international standards of Health and Safety in the work place.
Caution!
The machine must be protected by a fuse or a circuit breaker in the
electrical circuit.
The machine must be installed by a authorized SCAN COIN
representative.
Please also note the following when installing the machine:
• Operating temperature
15–35 °C
• Operating humidity
30–80% R.H.
Do not place the machine close to any radiators. Make sure there is
some free space around the machine that allows the air to circulate.
Make sure that the machine is positioned so that the socket outlet is
easily accessible.
If the plug on the supply lead to the machine has a fuse, make sure it
has the correct rating in amps.
Although this machine has been tested and complies with the
national and international standards/regulations, it is recommend
that no kind of equipment which generate a high level of
electromagnetic interference (EMI) or vibration is placed close to the
machine.
