SBS-6000 9
Chapter 3
General operation and use guide
3.1
Operation standard
Test interface
Please connect the wire to test interface, and then connect the wire to
tested line. Please don’t touch the bare metal part of test clips, lest
there is high voltage on wire.
RS232 port
Don’t connect with RS232 port with electricity, also don’t short-circuit
the interface by metal, otherwise easily damage the internal circuit.
Display
The new tester has a protective mask on LCD, please rip it before use.
Cleaning
This tester shell is made of plastic, please use dry and soft cloth to wipe
and clean, please do not use a volatile chemical agents, otherwise easy
cause discoloring or deformation.
Protection of shell and operation panel
Please don't spray the volatile chemical reagent onto shell or panel, or
don’t make them touch with rubber or PVC for long time, which easy to
cause fault.
Move tester
When you want to move the tester, please check the power wire and
cable, to ensure them unconnected with tester, and then take tester by
both hands.
Longtime unused
If the tester is longtime unused, the battery characteristics will getting
worse, or the battery need charging. If the charging time is very short
and operation time is also short, the tester has to be replaced.
