ELLIPSE2 AHRS & INS
– Hardware Manual
ELLIPSE2HM.1.3
2.2.9.2. GPS antenna advice for Ellipse-D
The Ellipse-D embeds a survey grade GNSS receiver that supports L1/L2 GPS, GLONASS, Beidou and Gallileo
signals. For best performance and robustness, please follow these recommendations.
Parameter
Specifications
Remark, conditions
Antenna connector
SMA female
IP-68 when connected
Input impedance
50 Ω
LNA supply voltage
5.0 VDC
LNA supply current
< 70 mA
Minimum antenna gain
15 dB
Maximum antenna gain
45 dB
In order to enable proper heading measurements, L1/L2 GPS antennas are required, and tracking other
constellations is recommended for optimal performance.
SBG Systems has selected some high quality GPS antennas for different applications. Please refer to the
section 5.5 GNSS antennas to get more details on available antennas.
Note: As a rule of thumb, true heading and/or RTK measurements require higher quality GPS
antennas to achieve the stated accuracy.
33/50
陕西威瑞仪器仪表有限公司 主营全球知名:气象环境智能交通仪器、安防消防警用军用设备
TEL:029-88186182 WEB:www.go1go.com EMAIL:[email protected]