8
Figure 16
11. INSTALLING THE LED
LIGHT KIT & LIGHT
SHADE
NOTE:
Before starting installation, disconect
the power by turning off the circuit breaker or
removing the fuse at fuse box. Turning power
off using the fan switch is not sufficient to
prevent electric shock.
Step 1.
Remove the 1 of 3 screws from the
posts of the mounting plate and keep it for
future use. Loosen the other 2 screws. (Do not
remove) (Fig. 16)
Step 2.
While holding the LED light kit under
your fan, make the polarized plug connections:
- Red to white
- Black to black
Step 3.
Place the key holes in the LED light kit
over the two screws previously loosened from
the mounting plate. Turn the LED light kit until
the LED light kit locks in place at the narrow
section of the key holes. (Fig. 16)
Step 4.
Securely tighten the two light kit
mounting screws previously loosened and the
one previously removed. (Fig. 16)
Step 5.
Raise light shade up against the LED
light kit, and secure it to fan by turning light
shade clockwise until snug. DO NOT
OVERTIGHTEN. (Fig. 16)
NOTE:
The metal cover included with your fan
is an option to replace the glass for the light in
the event that you prefer not to use the light
feature of your fan. The metal cover is not
necessary for the light operation; it can be
saved for later use if desired.
LED Light kit
Screws
Mounting
Plate
Connection
plugs
Light shade
