7
Figure 14
Figure 13
Figure 15
10. INSTALLATING THE
MOUNTING PLATE
Step 1.
Remove the light shade from the
LED light kit assembly. (Fig. 13)
Step 2.
Remove the LED light kit from the
mounting plate. (Fig. 14)
Step 3.
Remove the 1 of 3 screws from the
mounting ring and loosen the other 2
screws. (Do not remove) (Fig. 15)
Step 4.
Place the key holes on the
mounting plate over the 2 screws
previously loosened from the mounting
ring, turn mounting plate until it locks in
place at the narrow section of the key
holes. Secure by tightening the 2 screws
previously loosened and the one
previously removed. (Fig. 15)
Mounting ring
Mounting
plate
Screws
Screws
LED light
kit
Mounting
plate
Light
shade
LED Light kit
assembly
