Technical Data subject to change without prior notice
19
EN
BAL 876.10 / .02
OPERATING INSTRUCTIONS
For Electronic Polarity Reversing Control Units
WORKHOLDING AND AUTOMATION
Contents:
1. Safety
a) Dangers of Incorrect Use
b) Specifications for Correct Use
c) Hazards
d) Authorised Operators
e) Workplace
f) Ambient Conditions on Site
g) Safety Devices
2. Installation
a) Mounting Sketch and Technical Data
b) Mounting and Connection
1) Environmental conditions on site
2) Connection of controller
3) Connection of Pendant control unit 876.02
4) Connection of coding-switch for holding-forces
5) Setting of parameters
3. Operation
a) Positioning of work piece under reduced holding
force
b) Machining with full holding force
c) unloading and demagnetisation
4. Check of Controller and Trouble Shooting
5. Standards and Guarantee
Copyright:
All rights reserved, including for all photographic presentations and electronic data-files. The commercial
use of texts and photographs is subject to approval of the publisher.
