16
EQJW146F001 EN
Start-up
4. Select parameter level [
q
].
5. Open parameter level [
Û
].
6. Select parameter [
q
].
7. Activate editing mode for the parameter [
Û
].
blinks.
8. Change parameter [
q
].
9. Confirm parameter [
Û
].
Î
To set further parameters in the opened parameter level, repeat the steps 6 to 9.
10. Select
End
[
q
].
11. Exit parameter level [
Û
].
Î
To set further parameters in another parameter level, repeat the steps 4 to 9.
12. Turn the rotary switch back to normal switch setting (information level).
All parameter settings are saved in a non-volatile memory in the controller.
3.4 Resetting to default settings
All parameters set over the rotary switch as well as parameters in the PA1, PA2 and PA5
parameter levels can be reset to their default settings (WE) except for the maximum flow
temperature and the return flow temperature limits in PA1 and PA2.
1. Turn the rotary switch to (parameter and configuration level).
Reading:
0 0 0 0
2. Enter key number 1991 [
q
].
3. Confirm key number [
Û
].
The controller loads the default settings.
Reading:
0 0 0 0
Note
