Saunier Duval Semia Condens F24 E, Инструкция по использованию, установке и обслуживанию

Страница: 7 / 52

5
Instructions for Use
6 Operating the boiler (user instructions)
6.1 Control panel
8
5
1 7
2 3 4
6
9
10
Legend
1
Operating indicator
2 Operating mode selection
3 Heating temperature adjustment
4 DHW temperature adjustment
5 Display of the temperature /
error codes
6 Pressure gauge
7 Safety lockout indicator
8 Timeclock
9 Timeclock
toggles
10 Timeclock mode selector
6.2 Commissioning and lighting
Make sure that:
the boiler is connected to the electrical
supply (the green indicator [1] blinks).
the gas service cock is open.
Turn the selector [2] bringing it in the
SUMMER
or WINTER position.
The operating indicator [1] on the
control panel turns on: the boiler is
ready to run.
Turn the selector [2] to modify the
operating mode of the boiler:
Central heating and
domestic hot water
Domestic hot water only
Installer mode
0
reset
Stand-by and appliance
frost protection
•
-
-
•
•
6.3 To program daily timeclock
Set the current time, by turning the dial [8]
clockwise until the current time is shown
against the indicator ‘ ’.
Push in plastic toggles [9] against the time
you wish the heating to be off.
The timeclock can operate in three
positions: automatic ‘
’, heating
permanently off ‘0’, and heating
permanently on ‘1’.
To select, move the lever [10] to the
desired position.
NOTE: In case the electrical supply fails
the timeclock will not operate as
it has no back-up battery backup.
Therefore, it will be necessary
to reset the current time once
electrical supply is restored.