Step 21
102S
SILVER 1" LARGE HEAD SCREW
(2 used in this step)
å
Insert the DRAWER SIDES (D14 and D15) at an
angle into the slot at each end of the INNER
DRAWER FRONT (P).
å
Fasten the INNER DRAWER FRONT (P) to the
DRAWER FRONT (O). Use two SILVER 1" LARGE
HEAD SCREWS (102S).
å
Slide the DRAWER BOTTOM (D716 ) into the grooves in
the DRAWER SIDES (D14 and D15) and INNER DRAWER
FRONT (P).
å
Fasten the DRAWER BACK (D78) to the DRAWER
SIDES (D14 and D15). Use four BLACK 1-9/16" FLAT
HEAD SCREWS (30S).
1
2
3
4
Be sure the
DRAWER
BOTTOM
inserts into the
INNER DRAWER
FRONT groove.
Groove
Groove
D15
D15
D15
D14
D14
D14
D78
P
VIEW THE T-LOCK BOX VIDEO
Unfi
nished
sur
face
Be sure the DRAWER
BOTTOM inserts
into the DRAWER
BACK groove.
30S
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(4 used in this step)
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
P
P
O
D716
D716
Surface with more holes
422191
www.sauder.com/services
Page 25
