Step 6
å
Separate the EXTENSION SLIDES (35MC) from the EXTENSION RAILS (35MA) as shown in the enlarged diagram below. Be
prepared, the parts are greasy.
å
Fasten the EXTENSION RAILS (35MA) to the RIGHT END (A) and RIGHT UPRIGHT (E). Use four GOLD 5/16" FLAT
HEAD SCREWS (3S).
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlarged diagram. Then, slide the inner
cartridge of the EXTENSION RAIL in to fi nd the other hole that lines up with the hole in the END. Turn a SCREW into this
hole.
å
NOTE: The EXTENSION SLIDES (35MC) will be used later for the DRAWER.
Open end
Open end
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
3S
A
E
422191
www.sauder.com/services
Page 10
Push the black lever in and pull the SLIDE from the RAIL.
35MA
35MC
