å
Fasten two NON-SWIVEL CASTERS (8CN) to the front
corners of the BOTTOM (C). Use eight BROWN 7/16"
LARGE HEAD SCREWS (6S).
å
Fasten two SWIVEL CASTERS (8CS) to the back
corners of the bottom. Use six BROWN 7/16" LARGE
HEAD SCREWS (6S).
å
Fasten the BOTTOM (C) to the ENDS (A). Use four
BROWN 1-1/2" FLAT HEAD SCREWS (14S).
å
NOTE: Two BROWN 1-1/2" FLAT HEAD SCREWS (14S)
will go through the SWIVEL CASTERS (8CS), through the
BOTTOM (C), and into the ENDS (A).
Step 5
415700
www.sauder.com/services
Page 8
BROWN 7/16" LARGE HEAD SCREW
(14 used for the CASTERS)
6S
BROWN 1-1/2" FLAT HEAD SCREW
(4 used in this step)
14S
These edges
must be even.
8CN
8CN
8CS
8CS
C
C
A
A
Sur
face with
mor
e holes
The tabs on the NON-SWIVEL
CASTERS must insert into these holes.
The wheel must be closer
to the long front edge.