Satel VERSA Plus LTE, Руководство по установке

Страница: 5 / 40

SATEL VERSA Plus LTE 3
1. Introduction
This manual describes the VERSA Plus LTE control panel and how it should be installed. In
addition, the manual provides information about devices compatible with the control panel
and how they are to be connected.
The VERSA Plus LTE alarm control panel meets the requirements of the following standards:
EN 50131-1 Grade 2, EN 50131-3 Grade 2, EN 50131-6 Grade 2, EN 50130-4 and
EN 50130-5 Class II.
2. Features
System structure
•
2 partitions (group of zones).
•
Each zone can be assigned to two partitions.
Zones
•
4 programmable hardwired zones on the control panel mainboard:
– support for NO and NC type detectors, as well as roller shutter and shock detectors,
– support for Single EOL and Double EOL configuration.
•
Electrical protection of the zones.
•
Maximum number of programmable zones: 30.
•
20 zone types.
•
NC type tamper input on the control panel mainboard.
Outputs
•
5 programmable hardwired outputs on the control panel mainboard:
– 2 high-current outputs,
– 2 low-current outputs, OC type,
– 1 relay output.
•
Maximum number of programmable outputs: 12.
•
22 performed functions.
•
Capability to operate the radio monitoring transmitter using the mainboard low-current
outputs (support for PC-16 OUT format).
•
3 power supply outputs on the control panel mainboard.
•
Electrical protection of the outputs.
•
An output on the control panel mainboard for connecting a dedicated, enclosure mounted
sounder.
Communication bus
•
Capability to connect keypads and expansion modules.
•
Electrical protection of communication bus.
Communication
•
Built-in communicators:
– PSTN,
– cellular (LTE module designed for use in the 2G, 3G and 4G cellular networks),
– Ethernet.